Chemical Dosing System for Water Treatment

Automatic Chemical Dosing Skids with PE Tanks, Metering Pumps & Control Panels

Clear Environment supplies integrated chemical dosing systems for industrial water and wastewater treatment. Available configurations combine PE chemical tanks, metering pumps, mixers, piping, valves and electrical control panels to meet different project requirements.

  • 100–1000 L Tanks
  • Automatic Control
  • Custom Configurations
Automatic chemical dosing system with PE tanks, metering pumps and electrical control panel

What Is a Chemical Dosing System for Water Treatment?

A chemical dosing system is an integrated equipment package used to store, mix and inject chemicals into a water treatment process at a controlled rate.

The systems shown here combine chemical storage tanks, metering pumps, mixing equipment, valves, piping and electrical controls. Depending on the selected configuration, the equipment can support manual operation or automatic dosing based on process monitoring.

Clear Environment offers chemical dosing systems for pH adjustment, coagulation, flocculation, disinfection and other chemical treatment applications.

 

Feature

Configuration

Chemical Tank

PE, 100–1000 L listed skid options

Dosing Pump

20 / 60 / 100 L/h listed options

Control

Manual or Automatic

Mixing

Agitator-equipped options

Power Supply

220V / 380V listed

Instrumentation

pH / ORP options

Skid Frame

Stainless steel frame shown

Main Components of a Chemical Dosing System

The chemical dosing systems can be assembled with the following main components, depending on the selected configuration.

chemical dosing system configuration
Main Components of a Chemical Dosing System

Chemical Dosing System Technical Specifications

The following configurations are based on the listed chemical dosing equipment options. Final specifications should be confirmed according to the project requirements.

Tank CapacityListed Pump FlowMixerOverall Dimensions (mm)
100 L20 L/hIncluded460 × 750 × 790
200 L20 L/hIncluded560 × 865 × 920
200 L60 L/hIncluded560 × 865 × 920
300 L20 L/hIncluded670 × 840 × 980
300 L60 L/hIncluded670 × 840 × 980
500 L60 L/hIncluded760 × 930 × 1060
1000 L60 L/hIncluded1010 × 1190 × 1370
1000 L100 L/hIncluded1010 × 1190 × 1370

Additional Equipment Information

ItemListed Information
Equipment TypeAutomatic chemical dosing equipment
Control ModeAutomatic / Manual options
Power Supply220V / 380V
Chemical TankPE
Piping & ValvesIncluded according to configuration
Level ProtectionShown in product component diagram
pH/ORP MonitoringAvailable in illustrated configuration
WarrantyOne year stated in source listing; commercial terms to be confirmed

Pump discharge pressure, actual dosing performance, chemical compatibility, electrical frequency and final dimensions must be confirmed before ordering.

How Does an Automatic Chemical Dosing System Work?

For a pH-controlled dosing application, the process pH sensor measures the water condition and sends a signal to the controller. The controller operates the relevant dosing pump according to the configured setpoints and control logic.

The dosing pump delivers chemical solution from the storage tank to the treatment process. The system continues monitoring the process condition to determine when dosing should start or stop.

Automatic Chemical Dosing Working Principle

Operating Process

  • Chemical Storage and Mixing — The chemical solution is prepared or stored in the PE tank.

  • Process Monitoring — A pH or ORP sensor measures the relevant process condition.

  • Automatic Dosing Control — The controller activates or stops the dosing pump according to the selected control settings.

  • Chemical Injection — The metering pump delivers the chemical solution to the treatment tank or injection point.

Chemical Dosing System Applications in Water Treatment

Our chemical dosing systems are designed for a range of chemical injection applications in water and wastewater treatment. Depending on the chemical properties and treatment requirements, the equipment can be configured with suitable metering pumps, PE tanks, mixers and control instruments.

Disinfectant dosing system for water treatment

Disinfectant Dosing

Controlled dosing of compatible disinfectants for microbial control in water treatment processes.

Flocculant preparation and dosing system for wastewater treatment

Flocculant Dosing

Chemical injection to promote particle aggregation and support solid-liquid separation in water and wastewater treatment.

Acid & Alkali Dosing

Controlled addition of acids or alkalis for pH correction and chemical conditioning.

Corrosion inhibitor dosing system for industrial water treatment

Corrosion Inhibitor Dosing

Chemical dosing for corrosion control in compatible industrial water treatment systems.

PAC / PAM Dosing

Dosing of polyaluminium chloride (PAC) and prepared polyacrylamide (PAM) solutions for coagulation and flocculation processes.

Automatic pH adjustment system with dosing pumps and controller

Automatic pH Adjustment

pH-controlled chemical dosing using monitoring instruments and automatic pump operation according to configured setpoints.

Chemical Compatibility and System Selection

The selection of dosing pumps, tank materials, piping and control instruments depends on the chemical type, concentration, dosing flow rate and injection pressure. Please provide your chemical specifications so that a suitable dosing system configuration can be recommended.

Advantages of Automatic Chemical Dosing Systems

Flexible Dosing Control

Manual and automatic control options can be selected to match the chemical dosing process and operating requirements.

Process Monitoring Integration

Suitable configurations can incorporate pH or ORP monitoring to support dosing control based on measured process conditions.

Integrated Equipment Arrangement

Chemical tanks, pumps, controls, valves and piping can be arranged on a common skid for easier equipment integration.

Material Selection for Chemical Service

PE tanks and appropriate wetted materials can be selected according to chemical concentration and compatibility requirements.

Custom Chemical Dosing Systems for Different Project Requirements

Clear Environment offers configurable chemical dosing systems for water treatment contractors, system integrators and equipment distributors.

The equipment configuration can be selected according to chemical properties, dosing capacity, operating pressure, control requirements and installation conditions.

ComponentConfiguration Options
Chemical Tank100–1000 L listed skid options
Metering PumpListed 20 / 60 / 100 L/h options
Pump QuantitySingle or multiple pumps
AgitatorWith mixing equipment
Control PanelManual or automatic control
MonitoringpH / ORP instrumentation
FrameStainless steel skid structure
Power220V / 380V listed

Information Required for System Selection

  • Chemical name and concentration

  • Required dosing flow rate (L/h)

  • Injection pressure (bar)

  • Tank capacity (L)

  • Manual or automatic control

  • Power supply and destination country

Your Chemical Dosing System Supplier in China

Clear Environment supplies chemical dosing systems and water treatment equipment for international distributors, engineering companies and system integrators.

We offer standard equipment configurations and project-specific options to support different chemical dosing requirements.

Complete Dosing Packages

Tanks, metering pumps, mixers, controls and piping in an integrated equipment package.

Flexible Configurations

Equipment options selected according to chemical properties and project requirements.

Technical Selection Support

Assistance with dosing pump specifications, tank capacity and control arrangements.

OEM & Custom Requirements

Support for agreed equipment configurations and private-label requirements.

Chemical Dosing System FAQ

Q1. What is included in a complete chemical dosing system?

A typical system includes a PE chemical tank, metering pump, mixing equipment, piping, valves and an electrical control panel. The final components depend on the selected configuration.

Q2. What tank capacities are available?

The listed complete dosing system configurations include 100 L, 200 L, 300 L, 500 L and 1000 L tanks. Larger standalone PE tanks are also shown in the product range.

Q3. Can the dosing system operate automatically?

Yes. Automatic dosing configurations are available. Depending on the application, the control system can use process monitoring signals, such as pH or ORP, to operate the dosing pumps.

Q4. Can the system be used for acid and alkali dosing?

The product range includes pH adjustment applications. Pump wetted materials, tank compatibility, piping and control arrangements must be confirmed according to the chemical type and concentration.

Q5. Can you supply dosing systems with multiple pumps?

Multiple-pump dosing arrangements are shown in the product materials. Pump quantity and arrangement can be discussed according to the project requirements.

Q6. What information do you need to prepare a quotation?

Please provide the chemical name, concentration, dosing flow rate, injection pressure, tank capacity, required control method, power supply and destination country.

Related Water Treatment Equipment

Scroll to Top

Send your inquiry today